Get To Know More About Cab Corner

Even trucks have the weakest point and one of them is the cab corners. One of these is the cab corner. It is prone to water and road salt due to its location. The factory holes present in the cab corner can get plugged up with dirt which will result in rust formation. Mostly rusted cab corners will not need necessary cab corner replacement, but they can be easily fixed with the help of a patch panel.

Either metal or stainless-steel finish is the materials that are used for making cab corners. This type of direct-fit through welding is very easy and simple to install. If the cab corner is fixed properly, it will give a beautiful and neat look on your truck. The brief description of the two materials used are below:

1. Metal - The most basic and common type of aftermarket cab corner is made of metal. One of the best things about using a metal cab corner is that it can be easily customization. The stock black finish will prepare the metal part for a coating of primer. Once it is done, you can paint on it later, so that the color will match the cab corner. If you need it, you can also use some other color to give it a customized look.
2. Stainless steel - When compared to the metal type cab corner, this type of cab corner is less tedious to install and looks good by itself. Once you are done, weld and polish it later. Even in some stainless steel, you can see the truck's make name and logo to remind people of the awesome ride.

A few problems that you may face are here below:

• Rust and severe damage to the cab corner will always cause some trouble. If you have been driving your vehicle for years, then dirt, salt, road debris, dirt, and moisture will get accumulated in the cab corners.
• The metal will get ruined by the corrosive elements l that support the cab corner. The very first thing that you will see is the rust holes.
• The small cracks will eventually become larger until the holes are too big and you won't be able to ignore them.
• One good thing about the metal cab corner is that you don't have to strip off the entire metal covering of the cab corners.
• Always there is a solution to fix it before the cab gets fully damaged. In this type of scenario, the corner patch panel can always come to the rescue. You can use this to change the rusty or heavily dented panel on the cab.
• This repair patch will get perfectly aligned with the rest of the cab panel and hug the corners and contours of the vehicle beautifully.
• This step will eventually prevent the rust from spreading and ruining the cab corners. The flaws can be covered up the sheet metal can easily cover up the flaws and the problem can be fixed.

Do you like repairing your car on your own? Thinking of opening up your own car body shop? It is a great business opportunity if you love cars and possess a good work ethic. Now if you want your shop to be successful, then you will require a combination of effort as well as car mechanic training. And of course, the correct equipment which would upgrade your speed as well as make your repair work easy. If you have the right tools, then you can easily meet the demands of today's car body structures. Here are some of the most essential tools which you might need to repair your cab corner.

• Die grinder
• Air saw
• Angle grinder with a sanding attachment
• Cut-off tool
• Large magnets
• Body filler
• Sanding blocks
• Plastic filler spreader
• Sandpaper in 180-, 500- and 800-grit
• Automotive primer
• Paint gun
• Air compressor
• Replacement cab corner
• Permanent marker
• MIG Welder

If customers trust a brand, then it would make them loyal, and if they are loyal, then they will surely buy more. We are well aware that customers want comfort, cheerfulness, as well as satisfaction in their lives and that, the reason why we offer top-quality auto parts brands to our customers. We make sure to provide a positive experience to our consumers from the brands which we are offering so that they can form an opinion that a particular auto parts brand is trustworthy and would give them peace of mind while they are purchasing it for their car. Here we have listed out some top brands for cab corner.

Various Manufacturers Cab Corner

vehicle will eventually become an eyesore due to rust and holes. Apart from this, the rusted cab corner will permit the rain and moisture to enter your vehicle. And hence the car seat and other interior accessories will get damaged quickly. To avoid these issues, rusted corners have to be fixed immediately with a cab corner repair panel. Here is a simple guide as to how you can change the cab corner at home and with the help of a few tools.

Step 1

First, get the right replacement for the cab corner. Depending on the year, make and model of the truck, you can either go to a junkyard and cut out the patch you need or you can get them from the aftermarket suppliers to see if there is any supplied replacement available.

Step 2

Choose the area where you can replace the cab corner. If the problem arose due to rust, then you have to make sure to have a solid surface to fix your new metal. But, if the issue is due to body damage, then ensure that your patch can cover all the damage.

Step 3

With the help of a cut-off wheel or air saw you must trim the patch panel so that it fits the area you want to replace. Now fix the patch over the original panel and outline the area on the truck you are looking to remove by using a permanent marker. The goal of this step is to make the patch panel fit as exactly as possible.

Step 4

The damaged area on the truck has to be cut out. As you start cutting, cut them less and eventually trim away the original metal until the panel fits perfectly inside the hole.

Step 5

Grind the paint off of the edges of the patch panel and, as well as the truck by utilizing a grinder with the sanding attachment to make sure the welding is clean. Now you know that the metal is clean, hold the patch panel back in place with magnets and if it is lined up perfectly, weld the patch in four corners.

Step 6

Now you must slowly and carefully weld the replacement panel back in place. The metal will get hot and warp if you weld the panel too fast. The result will be better if you take more time.

Step 7

Grind down the weld smoothly along with the body once the entire panel is welded in place.

Step 8

Now use a mixer and mix the body filler on a scrap piece of cardboard. Now apply it as a layer to the patch panel. Allow the filler to dry. Now sand it down by using a sanding block and 180-grit sandpaper to rough in a shape.

Step 9

Until the panel is roughed in, keep applying the filler. You must repeat the process again by using 500- and 800-grit so that a good basis is formed for the primer.

Now spray the primer. Once you have sprayed take it to a professional body shop and they will blend the color correctly and your truck will be all set.