Everything You Need To Know Push Bars

A Truck Push Bar is a steel, aluminium alloy or polymer constructed structure and is fitted to the front end of the vehicle. Push bars are usually prohibited from use in urban areas but are useful for protection in the wild where safety is a concern for the occupants. These types of addition are primarily employed in rendezvous and off-roading vehicles where the front end of the vehicle is prone to damage and push bars serve to protect the important engine components. Push bars are available in many different sizes and forms and are normally composed of welded steel or aluminium tubing, or, more recently, moulded polycarbonate and polyethylene materials.

Push bars are affixed to the front end of most off-road vehicles. They come in all sizes and in chrome and powder-coat finishes to choose from.

Push Bars are categorised based on their construction and the types are:

1. Competition Push Bar: These are used in off-road competitions as they can be easily removed when damaged. They offer maximum protection with sufficient ground clearance.
2. Single Hoop Push Bar: This type of push bar features a single hoop over the radiator of your truck which is attached to its bumper section. This type of push bar offers a good balance between front-end protection and weight.
3. Triple Hoop Push Bar: These push bars are the heaviest type and provide maximum protection to your truck in case of an animal collision.
4. Baja Push Bar: These types of bars have additional reinforcement into the chassis so they can be used with high-power winches. They are intended for off-road driving and not for road use. They have a skid plate integrated on the bottom of the push bar for better protection.

Here are the most important benefits of employing a Push Bar:

• Push bars and other vehicle frontal protection systems for motor vehicles are primarily intended to reduce damage to the vehicle’s structure and systems in the event of either a front-end impact or an animal strike.
• To reduce occupant injury resulting from the force of a crash.
• To protect against minor damage caused during parking.
• They add a more rugged and tough look to the truck which is why most off-roaders use them.

These can sustain considerable damage as these are designed to take the impact in case of a front end collision. A major head -on collision can bend or even break the tubes that hold the structure of the push bar. In such a situation it is best to get a replacement instead of repairing them since repair jobs can compromise the structural rigidity of the bars. Push bars can affect deployment of the airbags which is one of the big concerns prohibiting usage of these bars. There are few drawbacks associated with the use of push bars but are necessary in off-roading or rural scenarios. Therefore the use of push bars must be done with precaution and necessity should be the only factor for using one.

Push bar installation is easy andt the advantages are immense. Make sure to use the following tools while installing a push bar:

• Ratchet
• Socket Set
• Torque Wrench
• Extension
• Gloves
• Wrench
• Clip tool
• Utility Knives

If customers trust a brand, then it would make them loyal, and if they are loyal, then they will surely buy more. We are well aware that customers want comfort, cheerfulness as well as satisfaction in their lives and that’s the reason why we offer top quality auto parts brands to our customers. We make sure to provide a positive experience to our consumers from the brands which we are offering so that they can form an opinion that a particular auto parts brand is trustworthy and would give them peace of mind while they are purchasing it for their car. Here we have listed out some top brands for Push Bar.

Westin Push Bar

Take a look at other such structures that you could add to the front of your rig to protect it against animal collision or to enforce the front end for an off-roading trip:

• Brush Guard
• Grille Guard
• Bull Bars
• Grille Air Deflector

These structures are designed to take the impacts that would otherwise severely damage the front end of your vehicle. So make sure these are in best condition to maintain protection of your ride. Regular inspections for rust and dents can be one way to maintain and prolong the life of these bars. Also, make sure the installation is properly done and that all the hardware is tightly fit. Push bars are available from around 400 to 750$.

The installation process for push bars is similar for most vehicles, but it is advised to refer to the instruction guide provided with the product for the best results. Here is a guide to installing the push bars on a truck:

• The first step is to remove the skid plate or the under-engine cover on the underside of the bumper. It is held on using a combination of clips and bolts. Remove them using a clip tool and ratchet and the appropriate socket.
• For models With Tow Hooks, remove the two bolts securing the tow hood on each side and place the lower mounting bracket.
• Undo the rear mounting bolt to the tow hook and install the support bracket. Snug all the hardware but do not fully tighten.
• For models Without Tow Hooks, locate the bolts that attach the bumper to the frame and undo those bolts and attach the frame bracket in place using the same bolts and hardware.
• Then install the mounting bracket to the frame bracket using the appropriate hardware including washers, locking washers and nuts.
• Attach the support bracket to the vehicle’s frame using appropriate hardware.
• Secure the support bracket to the lower mounting bracket.
• Repeat the installation of these brackets on the other side of the vehicle.
• With some help hoist the push bar in place and attach the hardware to both the mounting locations. Snug the bolts but do not tighten them.
• Centre the push bar and adjust if necessary.
• Tighten all of the hardware securing the mounting brackets and support brackets.
• Remove the push bar from the vehicle and place the plastic skid plate and mark the location where the mounting brackets touch the plate.
• Using utility knives cut out the area of intersection and mount the skid plate to the vehicle using the clips and bolts.
• With help, place the push bar on the mounting bracket and secure it using the appropriate bolts.
• Torque all the bolts to specifications provided with the instructions.

 The process for installation may differ between different vehicle makes and models and this guide provides an approximate as to what steps may be involved while installation or removal. Make sure to refer to your owner's manual for further clarification.