You Should Know This About Your car Bull Bars

Bull bars are strong tubular structures that get attached to the front of the vehicle to protect the front-end of the car body in the event of a collision with an animal. A simple attachment like a bull bar can aesthetically increase the look of the vehicle many folds and give it more masculinity. Bull bars come in a variety of shapes and sizes and also be color coded in any color of your choice.

A bull bar supersedes the car bumper and makes it largely redundant and offer added protection from scrubs, logs, banks, etc. especially when fitted onto an off-road vehicle. The bull bars work as vehicle’s “bar work” in combination with rails and side steps. Although bull bars are not an important accessory for city drivers, many off-road drivers prefer this as an important attachment as it is believed to provide critical strength and protection to the vehicle. A particular bull bar called “fair-dinkum” is used as a protection against animal collision, if you are travelling off-road where they have grazing or wild animals. An important study from Australia stats that there is an increased chance of collision with animals during sunrise and sunset, when driving on highways. While collision with a rabbit is trivial, a sheep or kangaroos can cause serious damage. This is the reason bull bars are attached to the front of the car.

Small bull bars also called Nudge Bars don’t extend to the full width of the car, but still provides enough protection to the car. These bars look stupid on large vehicles but are effective on MUVs and smaller SUVs and also enhance their looks.

Although there is no particular categorization of the types of bull bars. Still they can be differentiated on the basis of the composition of different bars.

Bull bars with skid plates

Bull bars with skid plates are made up of very tough and durable steel material. These metal sheets are welded or bolted together to form a single big part of a bull bar. These steel sheets are usually removable and can be used to enhance the look of the car other than practical functionality. These skid plates when added to your bars, protect the bumper of the vehicle from impacts due to small rocks, debris and pebbles while driving. They also protect from big rocks, taller parking barriers and curbs too.

Bull bars are widely used on trucks, SUVs, and police vehicles. These bars are installed on the front of the car and protects the vehicle from collision in case of accidents with other vehicles, accidents with animals on highways and rural areas and while ramming other vehicles during pursuits in case of police vehicles. Bull bars can differ in sizes and forms and are made from welded steel or aluminium sheets, moulded in polycarbonate and polyethylene materials.

In many countries, there are many regulations with regards to what kind of bull bar and of what type and specifications can be installed on a vehicle. This is because, bull bars can be a major reason for many cases of road-kills. But the question arises whether a non-living object can be blamed for the reckless driving of the driver.

In modern vehicles, the bull bars have been incorporated with the safety system of the car. This majorly include the deployment of cabin airbags on collision with the bull bars. For this, bars made of polyethylene are built to detect the force of impact on collision. This not only protects major engine components but also protects the driver and other passengers.

Bull bars save the drivers from dangerous injuries or death at the time of impact during collision. Thus, it also promotes safety of other passengers, pedestrians, and animals on highways.

Many manufacturers use similar bull bar part number for various models, if they are based on similar platform. For example, a Silverado bull bar will look quite similar to Toyota Tundra bull bar, even though the mounting style is different.

Most of the bull bar manufacturers are not marketers. This leaves the whole game in the hands of the middleman to acquire quality bars and sell them to final customers. It is always suggested to purchase a good quality bull bar from a trusted retailer only.

Bull bars not only provide added protection to the vehicle but also provide great styling and look to the car. It protects the front-end of the vehicle during accidents and collisions. Bull bars are attached just above the bumper to protect the front of the car and all the major components hiding behind them, prone to damage. Bull bars also become an essential accessory for vehicles that run off-road.

Bull bars provide increased padding to increase the car’s safety. Most of the time it is also called bumper guard and grille guard. Bull bars protect the grille area of the vehicle and also give more clearance on the road while driving. This is helpful if you live in the area where the wildlife is in abundance and might collide with moving cars on roads and highways.

Great for off-road protection without limiting your truck’s capacity

Installing the bull bar to the front of the car can protect the billet grille, skid plates and undercarriage from severe damages. It also protects the underside of the vehicle when driving on rocky and difficult terrains and when climbing over creek bed. Bull bars also shield various important components of engine bay, radiator and headlights on impact when struck by animals or other cars.

Are you thinking of repairing your Bull Bars on your own? Then there is one thing which you must have, that is the right tools needed for repairing your Bull Bars. It is essential to make sure that you are outfitted with the right tools to get the work done properly. Have a look at some tools which you might need to get started with your repair work: -

• Adjustable wrench
• Bull bar package (with all the necessary bolts and brackets)
• Vehicle owner manual

Most of the people have a nature to avoid risk and seek safety. That is the reason why they would go with a familiar auto parts brand than a new one. It would prove to be safe and they know what to expect. Have a look at our top brands for Bull Bars which would offer safety and at the same time decrease the risk of disappointment.

It is very important to arm yourself with information before you shop any auto part. We are here to help you dive deep into the names of the Bull Bars related parts.

• Grille Guard

Depending on your particular vehicle make and model, and the choice of car body armour and protection, the installation process of the bull bars either very easy or complicated. Either you’ll be able to change it in minutes or can take hours to understand the procedure. The installation can also be complicated by the make and model and the experience of the person installing new bull bars, but mostly depends on the type of bar chosen.

Some of the major manufacturers of quality bull bars include names like Westin, Aries, Steelcraft, and Dee Zee. All these brands are known to provide best in class products made from top quality materials like stainless steel.

Once you have chosen the type of bull bar you want to install on your vehicle, one must take into consideration a few important points before starting the installation. Following are the points to keep into consideration while replacing or installing new bull bars:

• After opening the packaging of the bull bar, read the instruction manual carefully.
• Read the manual and inspect whether you have all the necessary parts and tools for installing the new bar.
• Locate the factory drilled holes from under the bumper rig.
• Match the holes with the holes of the bar and check for alignment.
• Insert the bull bar brackets onto the holes and torque them down.
• Next, the bull bar is connected to the mounting brackets.
• Check for proper levelling and fixation.
• Finally, double check the bolts and tighten them properly, if needed.