Accessorise Your Car With Door Mirror Light

Door mirror lights are fitted in the mirror housing. The mirrors housing combines turn signals lights and puddle lights. The puddle light is an increasingly popular feature that shines a small spotlight on the ground near car doors to help the driver and passengers avoid stepping into a mess after dark. The Door mirror turn signal light is fitted in a proper position on the mirror assembly where it can be seen by the side passing car. The turn signal is used to show an intended change of direction, whether turning left or right or moving out into traffic.

The door mirrors combine turn signals light and puddle light. These lights can come in different shapes and sizes. Modern cars have LED lights fitted. The turn signal light is amber in color and the puddle light can be white or yellow in color. LED lights quantity can be adjusted according to the door mirror housing.

The mirrors housing combines turn signals lights and puddle lights. The puddle light is a small spotlight on the ground near car doors to help the driver and passengers avoid stepping into a mess after dark. The turn signal light is fitted in a proper position on the mirror assembly where it can be seen by the side passing car. The turn signal is used to show an intended change of direction, whether turning left or right or moving out into traffic. In old Vehicles, bulbs were used but due to upgrade in the technology LED lights are used. These lights can come directly from the manufacturer or they can be installed later also.

Turn signal lights are important for the safe operation of the vehicle. They indicate the intentions to change lanes, turn a corner, or pull over to the roadside. When the turn signal lever is activated in either direction, a circuit is completed that allows power to flow to the door mirror, front and rear turn signal lights on the selected side. These lights then flash in a rhythmic pattern to draw the attention of other motorists. As the turn is completed the steering wheel comes back to center, a cam on the steering column catches on the turn signal lever and cancels the turn signal operation.

• Light not working due lose socket connection
• Bulb fuse off
• Wiring damaged or cut
• Blown out auto fuse
• Connectors (lug) in socket bend
• Flasher unit not working

If you want to repair your Door Mirror Light all by yourself, then let’s face it that you will need some auto body tools. You can always start by building your own tool chest. Searching for some tools needed to repair your Door Mirror Light? Don’t Worry! We are here to help you out. Here are some common tools that you will probably end up needing while repairing your Door Mirror Light.

• Clip Plier
• Set Of A Screwdriver
• Allen Wrench

Most of the people have a nature to avoid risk and seek safety. That is the reason why they would go with a familiar auto parts brand than a new one. It would prove to be safe and they know what to expect. Have a look at our top brands for Door Mirror Light which would offer safety and at the same time decrease the risk of disappointment.

If you are like most of us, then you won’t know much about the related components of car Door Mirror Light. Fear not! Here is a quick and easy guide to explain the related parts of the Door Mirror Light.

• Door Mirror Housing
• Door Mirror
• Door Mirror Wiring Harness
• Flasher Unit
• Door Mirror Hardware
• LED Strips
• Tailgate Light Bars

For replacing Door Mirror Light, labor would cost about $30 to $50, depending on the type of vehicle. To remove the Door Mirror Light, other related parts have to be removed first which may take about 30 to 45 minutes.

Remove the battery cable terminal connection. Push your side mirror assembly all the way forward. Remove the mirror glass safely. Look under the side mirror assembly to find the screw. Using the Allen wrench, remove the screw. Gently pull the lens down until it pops out of place. Unplug the connector slowly and safely. Carefully pull the connector out of the lens. You will see a bulb attached. Take the old bulb out and then insert the new one. Reverse the process as removed to assemble.