Things You Should Know About Parking Brake Shoe

The parking brake shoes are generally installed in the automobiles which have rear rotors (also known as rear disc brakes). The rotors are present at the rear wheels in most of the latest automobiles. The automobiles which are old have drums at the rear wheels, and the shoes which are inside the rear drums would act as parking brake shoes.

Look at the various types of parking brake shoe:

1. Twin Leading Shoe - This type of parking brake shoe is the least common type in latest automotive use. This type of system was utilized in front wheels. The reason behind this is that it is very effective at braking when it comes to forward direction.
2. Trailing and Leading shoe - A basic type of drum brake design is the leading/ trailing drum brake. This term means that only one shoe is “leading”. It might be moving into the rotation of the drum and thus a self-servo effect might be exhibited.
3. Duo-Servo - This type of servo actions in both the forward as well as reverse direction, that is the reason why it is named as duo-servo drum brake system. A single wheel cylinder with two pistons is used by this system which would activate the brake shoes.

The most important piece of equipment in a car is the car brake system as well as the brake shoes which are the components of brake drum. The latest brake shoes mostly come in a set of four, that it with two shoes for each side of the vehicle. These shoes would be different on each side. There would be one primary brake shoe which would have less friction. On the other hand, the secondary brake shoe would have more friction and it would face to the back of the vehicle. These shoes become very effective while braking as there is a difference between these two shoes and they also have different patterns on them. If you want to get the best results from your shoes, then it is very essential to know how they exactly work.

Have a look at some symptoms which would arise when there are some defects in the parking brake shoe:

1. Parking brake does not properly hold vehicle - The most common symptom of a faulty parking brake shoe is that it might not properly hold the automobile.
2. Parking brake does not function - One another main symptom of a defective parking brake shoe is that the parking brake might not engage or hold the vehicle at all.

It is said that a workman is only as good as his tools, and it is definitely true when it comes to the car bodywork. It is vital to have the right tools to repair your Parking Brake Shoe or else a straightforward job would turn into constant headaches. So that’s why we have listed out some invaluable tools below which you will need while repairing your Parking Brake Shoe.

• Replacement parking brake shoe set
• Tools
• Floor jack
• Jack stands
• Lug wrench
• Breaker bar
• Protective eyewear
• Gloves
• Brake spring removal tool
• Brake lube

You won’t have to think a lot while purchasing if you are already using a particular car part brand and are fully satisfied with it. There are a lot of people which trust a specific brand and would go with it once again with a minimum of thought. Here we have the best Parking Brake Shoe brands to help you out in choosing your favorite one in case you don’t have any. So, what are you waiting for? Have a look below and choose the best brand for your Parking Brake Shoe.

It is always good to learn more! That is the reason why we are here to help you out in gaining more knowledge about car Parking Brake Shoe. Here are some Parking Brake Shoe related parts which would help you to understand it in a better way.

• Parking Brake Connector
• Parking Brake Strut
• Parking Brake Bell Crank
• Parking Brake Pedal Pad
• Parking Brake Strut Lever
• Parking Brake Strut Spring
• Parking Brake Release Cable

I bet that you’re thinking as to how much does a Parking Brake Shoe replacement cost. Just keep in mind that it is not as easy as putting a fast and hard number on it. This is because the replacement/repair cost would be different for every Parking Brake Shoe and it would also vary depending on how in-depth the repair needs to be. If you are thinking about the exact cost, then you might take help of an expert mechanic. If you want to substitute your Parking Brake Shoe, then it would generally range between $136 and $193. Talking about the work expenses, they would range between $136 and $193.

Have a look at the steps with which you can install the new parking brake shoes:

Step 1

The first and foremost step is to carefully match the new brake shoes to the old units to make sure they are similar. After that activation lever should be transferred to the new shoe by undoing the metal clip at the top of the lever from the old shoe.

Step 2

The rear parking brake should then be mounted by installing the spring back onto the lever. Then push the spring and retainer to hold the new shoe to the backing plate.

Step 3

The adjuster should be disassembled to clean the threads and then they should be lubricated by utilizing the brake lube.

Step 4

The adjuster should be held to the rear shoe as the connecting spring should be attached to the forward shoe while putting the retainer spring onto the forward shoe to hold it against the backing plate.

Step 5

Then make sure that the self-adjuster should stay in place between the two shoes.

Step 6

The upper return spring and the pivot retainer washer should be inserted once the forward shoe has been fully installed.

Step 7

Then a pair dikes should be used to grab the spring and it should be pulled into the position. The opposite end of the brake tool can also be used. This operation should be repeated for the rear spring as well.

Step 8

Now once it has been completed, then all of the return and retainer springs should be double checked if they are secure and in place.

Step 9

The shoe adjuster should be adjusted properly so that the drum inside of the rotor can be fitted properly. The adjuster should be twisted outward while fitting the brake rotor over the shoes. The rotor should be jogged back and forth over the shoes to inspect the air gap between the shoes and the rotor. The adjuster should be moved until the gap is about 1/8 of an inch (3mm). After that the rear brake rotor should be reinstalled onto the wheel hub. Then the emergency brake handle's throw should be inspected and readjust it as per the requirements.